The Ultraflex solvent resistant 9-inch roller sleeve is used in the application of Ultraflex Liquid Waterproofing onto a flat roof or surface.

Once the sleeve has been fitted onto the 9-inch roller arm, the tool can be used to roll Ultraflex liquid onto the substrate and then used to dryroll the Ultraflex matting into the liquid until fully drawn through. 

Immediately apply another layer of Ultraflex to a minimum thickness of 1.5mm to fully embed the matting, while avoiding any pinholes. Ultratop topcoat can then be applied within 48 hours for weather protection and a glossy finish.

For the smaller, more detailed areas, such as upstands and pipes, the 4-inch roller arm and sleeves are more suitable.